| ¿Cinemacuteo? | ||
|---|---|---|
|
||
| Talleres 2012 |
|---|
 |
| Conectados |
|---|
| Hay 9269 invitados en línea y 89 usuarios en línea |
| Últimos en el foro |
|---|
|
| Publicidad |
|---|
| DIY Filming Dolly With 10' Track |
|
|
|
| escrito por Tommy Rodríguez | ||||
| Saturday, 19 de July de 2008 | ||||
|
View the HD version here... This project can be done for under $100. Below is a list of parts you will need, you can figure out what tools to use. I include some footage at the end, using this dolly. PARTS: (1) 32" square x 3/4" thick piece of plywood (8) Soft inline skate wheels (2) 32" pieces of 1 1/2" angle aluminum (1/8" wall thickness) (8) 1/4" / 20x2" hex bolts (8) 1/4" flat washers (28) 1/4" nuts (16) 1 1/4" fender washers (4) 1/4"x2 1/2" carriage bolts (2) 10' pieces of 1" sch. 40 PVC pipe (1) 5/16" drill bit (1) Medium size drill bit (smaller then your 5/16" bit) (1) Small drill bit (I used a 9/32" bit for my starter holes) Views: 1130
Only registered users can write comments. Powered by AkoComment Tweaked Special Edition v.1.4.6 |
||||
| < Anterior | Siguiente > |
|---|